-
After-sales Service
-
Contact Us
Hungary Prescribing equipment CX153A
Category:
HungaryMagnetic material equipment
Key words: Likai CNC
Product Description
Product features：
➤The workbench adopts a double-station configuration, which can cut two plates of material at the same time.
➤The overall casting structure of the roller frame has a high damping coefficient and excellent damping performance.
➤The roller and retractable reel adopt high-precision and high-rigidity cone positioning to control the jitter of the wire network.
➤The wire release wheel adopts a standard universal wire wheel (PV600 reinforced I-shaped wheel), without rewinding.
➤Equipped with disconnection and continuous cutting function.
Cutting sample：
Technical parameters：
| NO. | Project | Content | Technical parameters |
| 1 | Model | Model | CX153A |
| 2 | Processing capacity | Material plate size | 220×660mm/220×870mm |
| Total number of plates | 2×2 | ||
| Number of stations | 2 | ||
| 3 | Roller specifications | Outer diameter of roller × Number of slotting in single station × quantity | （Ф110±10 mm ）×1540×5 |
| 4 | Diamond thread | Diamond wire diameter | Ф0.12-Ф0.25 |
| Max line storage capacity | 40 km (φ0.25mm) | ||
| Max round-trip routing speed | 1000 m/min | ||
| 5 | Workbench | Workbench lifting stroke | 370mm |
| Cutting method | Vertical upward feed | ||
| Cutting feed speed | 0.1-99.9mm/min | ||
| 6 | Cutting fluid | Cutting fluid | Water-based or oil-based cutting fluid |
| Liquid storage capacity | 800L | ||
| Pump flow | 200×2L/min | ||
| 7 | Power/air source | Power supply | 380V±10%、50Hz |
| Power | 55 Kw | ||
| Air source | Using water-based cutting fluid, air pressure requirements≥0.4 MPa | ||
| 8 | Dimensions and weight | Dimensions (L x W x H) | 3500 × 2600 ×2700 mm |
| Weight | 8500 Kg |
Product Message
CX153A type multi-wire cutting equipment is mainly used for straight cutting of hard and brittle materials such as rare earth permanent magnets, quartz crystals, optical glass, precious metals, etc. The five-roller design can realize two functions: slicing and prescribing.
DF300/600 multi-wire cutting equipment is mainly used for slicing and processing of hard and brittle materials such as rare earth permanent magnets, optical glass, quartz crystals, etc. This equipment has the advantages of reliable function, high processing dimensional accuracy, and good product surface quality.
DA400 multi-wire cutting equipment is designed for the batch processing of super-hard and brittle materials such as sapphire, special ceramics, silicon nitride, etc. into straight pieces.The equipment is designed for a double-station design, and the cutting of super-hard and brittle materials is realized through the swing of the workpiece (reducing the cutting area).
Address: No. 7, Taipei South Road, Yantai Area, Pilot Free Trade Zone of China (Shandong)
Free Trade Zone
Contact: Mr. Wang
Contact Phone: +86-18753569015
Landline: +86-535-2133055
Fax: +86-535-2133155
Mailbox: likaikeji@ytlikai.com
