-
After-sales Service
-
Contact Us
Qatar Diamond multi-wire cutting equipment CX680
Category:
QatarMagnetic material equipment
Key words: Likai CNC
Product Description
Product features：
➤The roller frame adopts a double-wall structure of one-piece casting, with a high damping coefficient and excellent damping performance.
➤The workbench adopts a double-station configuration, which can cut two plates of material at the same time.
➤The roller and retractable reel adopt high-precision and high-rigidity cone positioning to effectively control the jitter of the wire network.
➤Roller-assisted disassembly bracket can effectively reduce the labor intensity and disassembly time of roller disassembly.
➤The operating compartment adopts an electric lifting structure and is equipped with a safety device.
➤The cutting chamber is open on three sides for easy operation and maintenance.
➤Configure the disconnection and continuous cutting function.
Cutting sample：
Technical parameters:
| NO. | Project | Content | Technical parameters | |
| 1 | Model | Model | CX680L | CX680C |
| 2 | Processing capacity | Max processing billet size | 160×680×160mm | 160×680×160mm |
| Number of stations | 2 | 2 | ||
| 3 | Roller specifications | Roller outer diameter × glue length × quantity | （Ф155±10 mm ）×690×4 | （Ф155±10 mm ）×690×4 |
| 4 | Diamond thread | Diamond wire diameter | Ф0.12-φ0.25 | Ф0.12-φ0.25 |
| Max line storage capacity | 40 km (φ0.25mm) | 40 km (φ0.25mm) | ||
| Max round-trip routing speed | 1200 m/min | 1200 m/min | ||
| 5 | Workbench | Workbench lifting stroke | 245mm | 245mm |
| Cutting method | Vertical upward feed | Vertical upward feed | ||
| Cutting feed speed | 0.1-99.9mm/min | 0.1-99.9mm/min | ||
| 6 | Cutting fluid | Cutting fluid | Water-based or oil-based cutting fluid | Water-based or oil-based cutting fluid |
| Liquid storage capacity | 800L | 800L | ||
| Pump flow | 200L/min | 200L/min | ||
| 7 | Power/air source | Power supply | 380V±10%、50Hz | 380V±10%、50Hz |
| Power | 33 Kw | 41 Kw | ||
| Air source | Using water-based cutting fluid, air pressure requirements≥0.4 MPa | Using water-based cutting fluid, air pressure requirements≥0.4 MPa | ||
| 8 | Dimensions and weight | Dimensions (L x W x H) | 2950 × 1920 ×2500 mm | 2950 × 1920 ×2500 mm |
| Weight | 6000 Kg | 6000 Kg | ||
Product Message
CX153A type multi-wire cutting equipment is mainly used for straight cutting of hard and brittle materials such as rare earth permanent magnets, quartz crystals, optical glass, precious metals, etc. The five-roller design can realize two functions: slicing and prescribing.
DF300/600 multi-wire cutting equipment is mainly used for slicing and processing of hard and brittle materials such as rare earth permanent magnets, optical glass, quartz crystals, etc. This equipment has the advantages of reliable function, high processing dimensional accuracy, and good product surface quality.
DA400 multi-wire cutting equipment is designed for the batch processing of super-hard and brittle materials such as sapphire, special ceramics, silicon nitride, etc. into straight pieces.The equipment is designed for a double-station design, and the cutting of super-hard and brittle materials is realized through the swing of the workpiece (reducing the cutting area).
Address: No. 7, Taipei South Road, Yantai Area, Pilot Free Trade Zone of China (Shandong)
Free Trade Zone
Contact: Mr. Wang
Contact Phone: +86-18753569015
Landline: +86-535-2133055
Fax: +86-535-2133155
Mailbox: likaikeji@ytlikai.com
