-
After-sales Service
-
Contact Us
Mexico Diamond multi-wire cutting equipment CF680H
Category:
MexicoMagnetic material equipment
Key words: Likai CNC
Product Description
Product features：
➤The workbench adopts a double-station configuration, which can cut two sheets of material at the same time, which greatly improves the work efficiency of the equipment.
➤Optimized overall frame mechanism, one-piece casting of the main frame, to increase equipment rigidity and cutting stability.
➤High line speed, the line speed reaches 2400m/min.
➤The optimized electrical system can effectively reduce power consumption by 5% to 30%.
➤The large-diameter and light-weight design of the routing guide wheel provides hardware support for equipment speed-up and the use of fine diamond wires.
➤Roller, retractable reel, double cone positioning and oil-cooled jacket structure shaft box, stable and reliable high-speed operation.
➤The guide wheel is streamlined to reduce disconnection.
➤Disconnection and continuous cutting function.
Cutting sample：
Technical parameters:
| NO. | Project | Content | Technical parameters |
| 1 | Model | Model | CF680H |
| 2 | Processing capacity | Max processing billet size | 160×680×160mm |
| Number of stations | 2 | ||
| 3 | Roller specifications | Roller outer diameter × glue length × quantity | （Ф170±10 mm ）×690×4 |
| 4 | Diamond thread | Diamond wire diameter | Ф0.10-φ0.25 |
| Max line storage capacity | 40 km (φ0.25mm) | ||
| Max round-trip routing speed | 2400 m/min | ||
| 5 | Workbench | Workbench lifting stroke | 245 mm |
| Cutting method | Vertical upward feed | ||
| Cutting feed speed | 0.1-99.9 mm/min | ||
| 6 | Cutting fluid | Cutting fluid | Water-based or oil-based cutting fluid |
| Liquid storage capacity | 800L | ||
| Pump flow | 200L/min | ||
| 7 | Power/air source | Power supply | 380V±10%、50Hz |
| Power | 100 Kw | ||
| Air source | Using water-based cutting fluid, air pressure requirements≥0.4 MPa | ||
| 8 | Dimensions and weight | Dimensions (L x W x H) | 3330 × 2220 ×2550 mm |
| Weight | 9500 Kg |
Product Message
CX153A type multi-wire cutting equipment is mainly used for straight cutting of hard and brittle materials such as rare earth permanent magnets, quartz crystals, optical glass, precious metals, etc. The five-roller design can realize two functions: slicing and prescribing.
DF300/600 multi-wire cutting equipment is mainly used for slicing and processing of hard and brittle materials such as rare earth permanent magnets, optical glass, quartz crystals, etc. This equipment has the advantages of reliable function, high processing dimensional accuracy, and good product surface quality.
DA400 multi-wire cutting equipment is designed for the batch processing of super-hard and brittle materials such as sapphire, special ceramics, silicon nitride, etc. into straight pieces.The equipment is designed for a double-station design, and the cutting of super-hard and brittle materials is realized through the swing of the workpiece (reducing the cutting area).
Address: No. 7, Taipei South Road, Yantai Area, Pilot Free Trade Zone of China (Shandong)
Free Trade Zone
Contact: Mr. Wang
Contact Phone: +86-18753569015
Landline: +86-535-2133055
Fax: +86-535-2133155
Mailbox: likaikeji@ytlikai.com
