-
After-sales Service
-
Contact Us
Laos Swing multi-wire cutting equipment CA400
Category:
LaosSapphire/ceramic/other equipment
Key words: Likai CNC
Product Description
Product features：
➤Roller double cone positioning, easy loading and unloading.
➤8 guide wheel design, reduce disconnection rate, fast winding.
➤Swing cutting, stronger cutting force.
➤The lower workbench is easy to operate.
➤The cutting chamber is square on three sides for easy operation and maintenance.
➤Equipped with disconnection and continuous cutting function.
Cutting sample：
Technical parameters：
| NO. | Project | Content | Technical parameters |
| 1 | Model | Model | CA400 |
| 2 | Processing capacity | Max processing billet size | Ф125×260mm |
| Number of stations | 1 | ||
| 3 | Roller specifications | Roller outer diameter × glue length × quantity | （Ф145±10 mm ）×266×3 |
| 4 | Diamond thread | Diamond wire diameter | Ф0.12-Ф0.25 |
| Max line storage capacity | 20 km (φ0.25mm) | ||
| Max round-trip routing speed | 900 m/min | ||
| 5 | Workbench | Workbench lifting stroke | 150mm |
| Workbench swing | ±7° | ||
| Cutting method | Vertical upward feed | ||
| Cutting feed speed | 0.1-99.9mm/min | ||
| 6 | Cutting fluid | Cutting fluid | Water-based or oil-based cutting fluid |
| Liquid storage capacity | 220L | ||
| Pump flow | 200L/min | ||
| 7 | Power/air source | Power supply | 380V±10%、50Hz |
| Power | 30 Kw | ||
| Air source | Using water-based cutting fluid, air pressure requirements≥0.35 MPa | ||
| 8 | Dimensions and weight | Dimensions (L x W x H) | 3100 × 1490 ×2360 mm |
| Weight | 4000 Kg |
Product Message
CX153A type multi-wire cutting equipment is mainly used for straight cutting of hard and brittle materials such as rare earth permanent magnets, quartz crystals, optical glass, precious metals, etc. The five-roller design can realize two functions: slicing and prescribing.
DF300/600 multi-wire cutting equipment is mainly used for slicing and processing of hard and brittle materials such as rare earth permanent magnets, optical glass, quartz crystals, etc. This equipment has the advantages of reliable function, high processing dimensional accuracy, and good product surface quality.
DA400 multi-wire cutting equipment is designed for the batch processing of super-hard and brittle materials such as sapphire, special ceramics, silicon nitride, etc. into straight pieces.The equipment is designed for a double-station design, and the cutting of super-hard and brittle materials is realized through the swing of the workpiece (reducing the cutting area).
Address: No. 7, Taipei South Road, Yantai Area, Pilot Free Trade Zone of China (Shandong)
Free Trade Zone
Contact: Mr. Wang
Contact Phone: +86-18753569015
Landline: +86-535-2133055
Fax: +86-535-2133155
Mailbox: likaikeji@ytlikai.com
